Model 07 1.8MT Laofu replaced the right foot for the second time (20221210)
VerneCarpenter 
9 Laofu purchased in 2008, and the first replacement was in 2015. It was bought under a miscellaneous brand. Recently, the rubber and metal of the foot have been about to come into contact. TB bought the right foot of Topmakin and prepared to replace it himself. The picture is above.
Remove the rear socket of the kettle first
Remove the left socket of the kettle and remove the kettle and place it aside.
Then remove the fixing seat latch on the machine foot, and you can send the pipe and the machine foot to the metal clip.
The kettle and clip were removed and ready to remove the old machine feet.
Loosen part of the nuts and use a jack to jack the engine.
Gently hold the engine with a jack.
Topmagin’s feet are cheap and have a two-year warranty.
Topmagin’s feet are cheap and have a two-year warranty.
Topmagin’s feet are cheap and have a two-year warranty.
The old machine foot miscellaneous brand has been used for nearly 7 years
There is a clear gap in the lower part of the installed new foot.
Replace the feet of the machine.
Hot Information
Tesla Autopilot and similar automated driving systems get ‘poor’ rating from prominent safety group
April 1, 2024 Localization of EV parts without production scalability may not help cut EV price, says President, Amara Raja
March 27, 2024 
JCTSL may turn bus stands into charging points for e-buses
March 27, 2024 You May Like
